| Input
file |
The
input SeaWiFS L3 Binned file. If the <Enter> key is entered in
this field, the products in the input file will be updated (become sensitive)
to the Product field. |
| Category |
Toggle
buttons to select the statistical values to be calculated. The selections
of this field combined with the selections of the Product field
decide the products to be mapped and animated in the same window. |
| Product |
Toggle
buttons to select the products in the L3 Binned file to be projected.
The selections of this field combined with the selections of the Category
field decide the products to be mapped and animated in the same window. |
| Map
Projection |
The
projection method to be applied for the output. |
| Projection
Option |
| Isotropic |
Set
this keyword to produce a map that has the same scale in the X and Y direction. |
| Grid |
Toggle
button for the gridline display. |
| Continents |
Toggle
button for the coastline display. |
| Center
Lat/Lon |
The
latitude/longitude of the point on the earth's surface to be mapped to
the center of the projection plane. The default value is (0.0/0.0).
For more detailed information about this parameter, please see the description
about 'map_set' in the IDL Reference Guide. |
| Rotation |
The
angle through which the North direction should be rotated around the line
L between the earth's center and the Center Lat/Lon point.
The default value is 0.0. For more detailed information about this
parameter, please see the description about 'map_set' in the
IDL Reference
Guide. |
|
| Spin
Option |
| Window
Size |
The
width and the height of the output window for animation. |
| Number
of Frames |
The
number of frames to be created for each product for spinning. The
frames are created with the same projection but with different longitudes,
increased by degrees of (360 / Number of Frames), for the center.
If set to1, it allows different products to be animated with the same projection. |
|
