#
# MSL12 default parameters for CZCS
# 

# default output content
# ----------------------
l2prod=chlor_a tau_670 epsilon angstrom_520 nLw_443 nLw_520 nLw_550 nLw_670 l2_flags

# lon/lat subsampling
ctl_pt_incr=8

# calibration
# -----------
#
calfile=$OCDATAROOT/czcs/cal/cal_czcs_EG94.hdf
gain=[0.991,0.966,0.979,1.00] 
offset=[0.0, 0.0, 0.0, 0.0]

# process control
# ---------------
atmocor=1
proc_ocean=1
proc_land=0
proc_sst=0

# atmospheric correction and normalization
# ----------------------------------------
aer_opt=-6
aer_wave_short=670
aer_wave_long=670
aer_iter_max=10
rhoamin=0.0001
mumm_alpha=1.72
mumm_gamma=1.00
mumm_epsilon=1.00
gas_opt=1
pol_opt=0
brdf_opt=7
glint_opt=1
outband_opt=2
oxaband_opt=1
filter_opt=0
filter_file=$OCDATAROOT/czcs/msl12_filter.dat

# algorithm controls
# ------------------
chloc2_wave=[]
chloc2_coef=[]
chloc3_wave=[443,520,550]
chloc3_coef=[0.301200,-4.49880, 9.09830,-9.98210, 3.23500]
chloc4_wave=[]
chloc4_coef=[]
chlclark_wave=[]
chlclark_coef=[]
coccolith=[1.1,0.81,0.6,1.1,0.9,1.32,0.6,0.92]
wsmax=8.0

# flag thresholds
# ---------------
albedo=0.027
absaer=0.0
nlwmin=0.15
tauamax=0.3
epsmin=0.85
epsmax=1.35
glint=0.005
sunzen=75.0
satzen=60.0

# ancillary met/ozone over-rides (-1000 = ignore)
# ----------------------------------------------
windspeed=-1000
windangle=-1000
pressure=-1000
ozone=-1000
watervapor=-1000
relhumid=-1000

# masking
# -------
maskland=1
maskbath=0
maskcloud=1
maskglint=0
masksunzen=0
masksatzen=0
maskhilt=1
maskstlight=0

# line and pixel sampling
# -----------------------
spixl=1
epixl=-1
dpixl=1
sline=1
eline=-1
dline=1

# ancillary input
# ---------------
met1=$OCDATAROOT/common/S19461993_COADS_GEOS1.MET_noon
ozone1=$OCDATAROOT/common/S19891991_TOMS.OZONE
no2file=$OCDATAROOT/common/no2_climatology.hdf
# for flags and masks
land=$OCDATAROOT/common/landmask.dat
water=$OCDATAROOT/common/watermask.dat
icefile=$OCDATAROOT/common/ice_mask.hdf
# for tricho flag and first-guess MODIS SST (sstref)
sstfile=$OCDATAROOT/common/sst_climatology.hdf
# for PAR
alphafile=$OCDATAROOT/common/alpha510_climatology.hdf
tauafile=$OCDATAROOT/common/taua865_climatology.hdf

# processing mode (0 = standard processing)
# -----------------------------------------
mode=0

# sensor-specific parameters
# --------------------------